Picture Hanging Systems - „Made in Germany“
T&S Double Wall Track for Wire Hanging
Gallery Rails
Our T&S Double Wall Track consists of two parts:
A bottom track, which is mounted directly to the wall, and a top rail, which conceals the bottom track.
SLIDES, End caps, Picture Hangers, and Wires are sold separately.
TRACK & SLIDE® Double Wall Track
Wire Hanging Double Wall Track, up to 80kg
- Base/Top Rail: Aluminum
- Available Colors:
- RAL9010 White Item No. TS00001
- RAL9016 White Primer Item No. TS00001WH1
- Aluminum/Silver Item No. TS0001AN1
- Black Item No. TS0001BL1
- For T&S steel wires Ø 1.2–1.8 mm
- Slide and base rail covered
- Direct wall mounting
- Recommended working load per unit with 2 steel wires: max. 80 kg
- Dimensions: 2000 x 38 x 12 mm
Set Slider with stainless steel wire for Double Wall Track
Set Slider Stainless Steel wire for up to 80 kg per Object
- Set of sliders with 1.2 mm stainless steel wire (15 kg) or set of sliders with 1.8 mm stainless steel wire (40 kg)
- The 1.2 mm stainless steel wire is available in steel and black steel
- Lengths of the 1.2 mm stainless steel wire: 150 cm, 200 cm, 250 cm, 300 cm, and 500 cm
- Lengths of 1.8 mm stainless steel wire: only 200 cm, 300 cm, and 500 cm
- Includes Allen key
- For steel wires with a diameter of 1.2–1.8 mm
Art. No. TS00002 / TS000002BL | End Cap for Double Wall Track
End Cap for Double Wall Track
- White or black
- Made of plastic
Accessories and information
Mounting Tool:
MONTAGE TOOL
Article No. TS9008 (10,5 cm) and TS9008L (29,7 cm)
General Information:
- Necessary Tool for fixing the SLIDE units into the track: TS9008 and TS9008L MONTAGE TOOL*
- Before fixing the bottom Track onto the wall, check the masonry on site and select the appropriate anchors and screws.
- **tested by the TU Munich, Germany
Wire Hanging and Gallery Tracks/Rails » Double Wall Track up to 80 kg