|
1. |
|
Before mounting onto the frame, the Track adjustability screw should be placed all the way down, so that the mounting holes are unobstructed.
|
|
|
|
2. |
|
Place Track (A) onto the
center back side of the
frame, and mount it by
screwing the screws into the
middle of the mounting
holes.
|
|
|
|
|
3. |
|
Place Track (B) onto the
back side of the frame,
parallel to Track (A), and
screw one screw into the
lower mounting hole.
|
|
|
4. |
|
Measure and compare the
distance between both the
bottom and the top of the
2 Tracks (A&B).
|
|
|
|
5. |
|
Track (B) should be parallel
to Track (A).
Make adjustments if
necessary.
|
|
|
|
|
6. |
|
Mount the second screw
into Track (B). Adjust the
adjustability screw upward
on both of the Tracks, so
that the end of the screw
is in the middle of the
Track.
|
|
)
)
)
)
)
)